Uxie
No-name fanless industrial PC acting as OPNSense-based firewall and gateway.
Network interfaces
Port | Connection | Description |
|---|---|---|
Eth0 | ISP | Uplink from ISP |
Eth1 |
| Trunk connection to Core Switch |
Eth2 | – | |
Eth3 | – | |
COM1 | – | Serial console for OPNSense (Cisco RJ45 @ 115200/8N1) |
Hardware
TBD.
Configuration
You don’t want to change anything in UEFI Setup! It’ll probably won’t boot then ¯\_(ツ)_/¯
AC Power Loss should be configured to “Last State”. That’s all.