# Uxie

No-name fanless industrial PC acting as OPNSense-based firewall and gateway.

## Network interfaces

| **Port** | **Connection** | **Description** |
|------|------------|-------------|
| Eth0 | ISP        | Uplink from ISP |
| Eth1 | `sw01`     | Trunk connection to Core Switch |
| Eth2 | –          |             |
| Eth3 | –          |             |
| COM1 | –          | Serial console for OPNSense (Cisco RJ45 @ 115200/8N1) |

## Hardware


:::tip
TBD.

:::

## Configuration


:::warning
**You don’t want to change anything in UEFI Setup!** It’ll probably won’t boot then ¯\\_(ツ)_/¯ 

:::

AC Power Loss should be configured to “Last State”. That’s all.

---

**Documents**

- [BKSP 101](https://wiki.bksp.in/s/public/doc/bksp-101-HvrtlzB32F)
- [Проекты](https://wiki.bksp.in/s/public/doc/proekty-yjWZscgTvo)
- [Infrastructure](https://wiki.bksp.in/s/public/doc/infrastructure-VPKsJwVSVh)
- [Пространство](https://wiki.bksp.in/s/public/doc/prostranstvo-UF1eSbQDi5)
- [Equipment](https://wiki.bksp.in/s/public/doc/equipment-t5MYAVJ8l0)
- [Other](https://wiki.bksp.in/s/public/doc/other-uPW1YJQaRt)